(Brief Description / Abstract) :

Dr. S.K. Panigrahi obtained a Ph.D. degree in Mechanical Engineering from the Indian Institute of Technology, Kharagpur, in 2007. He joined as Associate Professor at the Defence Institute of Advanced Technology (Deemed to be University), DRDO, Ministry of Defence, and GoI India in 2010. He was promoted to Professor in the year 2014. Presently he is heading the Department of Mechanical engineering for the second term and he is also a Director (Additional Charges) for the School of Robotics. Before joining the DIAT (DU), he served as Associate Professor at North Eastern Regional Institute of Science and Technology (NERIST) Nirjuli, Arunachal Pradesh. He has worked as an International Visiting Academic with the University of New South Wales at the Australian Defence Force Academy (UNSW@ADFA). He has more than 28 years of comprehensive and intensive teaching, research, training, and administrative experience. His research works primarily in the areas of Analysis and Design of composite materials, Characterization of FRP composite materials, Finite Element Analysis of FRP composite materials and composite structures, Natural Fiber Reinforced Composite (NFRC) materials, Fracture Mechanics principle applicable to modelling and simulation of damages in orthotropic and isotropic materials and material characterization/Stress analysis/Solid Mechanics/Machine design. He has been working on developing advanced finite element methods and nonlinear finite element analyses and modelling of engineering structures with functionally graded/monolithic adhesively bonded joints. He has published over 196 research articles in peer-reviewed scholarly research papers International Journals/Conferences, including four books, one monograph, and many conference proceedings, including lectures. He is a member of many International/National professional bodies and has been a frequent reviewer for many leading peer-reviewed International journals of the highest standards. He has also served as a Technical committee member or advisory board member for several National/International conferences.

Education:

• 2009. International Visiting Academic at UNSW@ADFA, Australia
• 2007. Ph.D. in Mechanical Engineering, Indian Institute of Technology, Kharagpur
• 1996. M Tech in Mechanical Engineering with Specialization Machine Design and Analysis, National Institute of Technology, Rourkela, 
• 1992. B. E in Mechanical Engineering from VSSUT Burla (Formerly known as University College of Engineering (UCE) Burla) 

Professional Experience (Institution, Position and Period):

• Professor, DIAT (DU), Pune 2014 - Present 
• Associate Professor, DIAT (DU), Pune 2010 - 2014
• Associate Professor at NERIST and DIAT, 2009- 2010
• International Visiting Academic at UNSW@ADFA, Australia, 2009
• Assistant Professor (Selection Grade) at NERIST, 2006 - 2009
• Assistant Professor (Senior Scale) at NERIST, 2001 - 2006
• Lecturer at NERIST, 1996 - 2001
• Lecturer at OEC, 1992 – 1996  

Research Domains:

• Analysis and Design of Composite Structures
• Fracture Mechanics
• Material characterization/Stress analysis/Solid Mechanics/Machine design
• Characterization of FRP composite materials
• Finite Element Analysis
• Natural Fiber Reinforced Composite (NFRC) materials  

Specific Projects:

• R & D Project on 'Development of low cost indigenous acoustic materials like bamboo and cane for North East Region' (2002-2004)
• Project on 'Development of CADD laboratory', 10 Lakhs – MHRD (2007-2009)
• Technology development for cleaning of gun barrel: 5 Lakhs – DIAT (2013-2014)
• Optimization of skin and rib (spar) stiffness for optimum performance of co-cured Spar Wingskin Joints (SJW) in the pull off mode: (2014-2016) funded by ARDB (Co-PI – Dr. Sunil Nimje)
• Launcher pod with optimized weight and configuration using non-linear finite element analysis (2014-2015) funded by ARMREB
• Non-linear finite element analysis of armoured amphibious dozer (AAD) hull: 10 Lacs (2015-17) (Co-PI – Dr. Sunil Nimje)
• Non-linear finite element analysis of composite valve (trunnion type), Continuing

Research Collaborations:

Ph.D Thesis Supervision:

• Finite Element Analyses of Advanced Woven Composites with Multi-Scale modelling undergoing Ballistic Impact by Mr Mithilesh Dewangan (Submitted 2020)
• Effects of General Boundary and Coupling Conditions on the Vibration and Power Flow Characteristics of Isotropic Beams and Plates by Cdr K K Mohapatra (Awarded - 2019)
• An Integrated Fault Diagnosis Architecture for Gearbox using Hybrid Soft Computing Techniques by Cdr Sunil Tyagi (Awarded 2018).
• Experimental and numerical evaluation of LCF damage of turbine rotor blade of gas turbine engine by Mr. Benudhar Sahoo (Awarded 2017) (Co-supervisor –Dr. R K Satapathy, Sc ‘G’, DMRL, Hyderabad)
• Design and analysis of functionally graded adhesively bonded out of plane joints of FRP composite plates and tubes by Mr. S Nimje, Asst Professor, Mech Engg Dept of DIAT (DU), Pune (Awarded 2016).
• Fatigue life evaluation of an aero-engine combustor casing by Mr. Niranjan Sarangi, Sc ‘E’, GTRE, Bangalore (Awarded 2013) (Co-supervisor – Dr.U Chandrasekhar, Sc ‘G’, GTRE Bangalore).  

M.Tech. Dissertation Supervision:

2018-2020

• Static,Fatigue and Dynamic Analysis of Pylon of a Typical Fighter Aircraft by Sujan Vulugundam.
• Design of Continuous Emission Monitoring System for Exhaust Gas & Effects of Blended Fuel on Gaseous Emissions on IN Ships by Suren Keshav.
• Finite Element Analysis Car Wheel Rim with Aluminum Alloy and Composite Materials by Awanit Kumar.
• FEA of gas turbine blade of various advanced materials by Abhishek B Salekar.
• Design and Analysis of Spiral Head Projectiles Undergoing Impact by Numerical Simulation by V Pranay.
• Design and Analysis of 122mm Lightweight Composite Gun Barrel by W Dessie

2017-2019

• Numerical simulation of composite patches in airframe structures by Divakar V. 
• Design and development of composite railway sleepers using FEA by Tejas M Gondhalekar.
•  Analysis of 3D woven composite plates with a hole using multi-scale modeling by Pankaj Kumar.
•  Numerical design and analysis of aircraft exhaust jet pipe by Yatesh   Kumar Singh

2016 – 2018

• Vibration analysis of built-up structures by Prasanta Vastia.
• Design and analysis of dual display composite console by Satish Kumar.
• Thermo-mechanical stress analysis of adhesively bonded double lap joint by Ved Prakas.
• Effect of notches on gas turbine blades by Ashish Das.
• Finite Element Based Design and Analysis of Aluminum Honeycomb Sandwich Panel by Bheem Naik S

2015 – 2017

•  Finite element analyses of adhesively bonded joints of laminated FRP composites subjected to impact loading by Vikash Dhankar.
• Study on separation characteristics of particles in a marine centrifugal oil purifier by Navneet Kumar.

2014 – 2016

• Numerical analyses of rocket propelled anchor subjected to impact loading by S D Patil
• Vibration of Euler Bernoulli beams with damping under generally restrained boundary conditions by Abhishek Gaur
• Structural analysis of First Stage Gas Turbine Blade under coupled Thermal and Static loading by S S Rawat.

2013 – 2015

• Finite element analysis of corrugated sandwich structures filled foam core subjected to ballistic impact loading by Kallola Das.
• Stress analysis of helical gears using finite element analysis by Mayank  Ahirwar (Co-guide: Mr S Nimje).
• Stress concentration factors in isotropic plate having various geometric discontinuities by G K Marthande (Co-guide: Mr. S Nimje).
• Infrared signature management in naval ships by A K Shrutikar (Co-guide: Cdr AVSN Murthy, NSTL, Vizag).
• Effects of steering machine and external disturbances on designing ships autopilot by Pradeep Mishra (Co-guide: Lt Cdr Swarup Das).
• Suitability of machinery foundation for marine applications using modal analysis by Praneeth Kumar (Co-guide: Cdr KK Mohapatra).
• Numerical analysis of adhesively bonded lap joints subjected to thermo-mechanical loading by V K Balaji (Co-guide: Mr.S Nimje).

2012 – 2014

• Impact analysis of corrugated composite laminates by Mr. Navin Dahiwala.
• Ultrasonic cleaning technology for gun turret: An experimental investigation by Mr. M Ansari.
• Weight optimization of a gun saddle under static load by P Singh.
• Design and analysis of corrugated plates used in ships by Lt Cdr P Roy.
• Yaw/roll control of ships using rudder by Lt Cdr C Dheeraj.
• Roller bearing fault diagnosis using Adaptive Neural Fuzzy Inference System (ANFYS) by Manish Ku Patil.
• Gear fault diagnosis using a hybrid expert system by Lt Cdr T K Bipin Kumar.
• Numerical Simulation of an Armoured Vehicle Hull Subjected to Impact Loads by Vinaykumar V. Rokade

2011 – 2013

• Stress analysis of rotating disc in a gas turbine by Mr. Thambiran.
• Finite element based analysis of auto-frettagged gun barrel by Mr. Mithilesh Ku Dewangan.
• Development of cleaning technology for gun barrels by Mr. Aveek Dey.
• Fault detection of rolling element bearing using transient analysis by Lt Cdr CA Shahane.
• Fault diagnosis of the gearbox using finite element analysis by Lt Cdr SN Solwat.
• Development of active noise silencers for exhaust duct of submarines by Lt Cdr Melvin J Francis.
• Modeling and position control of pneumatic cylinder by Lt Cdr Raghu Nayar

2010 – 2012

• Stress distributions in a rectangular plate with holes by Ephrem Damtew.
• Application of the hybrid neuro-genetic algorithm to estimate damage location and severity in a cracked cantiliver beam by S Patki.
• 3 D stress distribution in an edge nothed specimen due to bending by POINTS scientists

Master of Science (By Research) Thesis

• Life evaluation of thermal barrier coating in gas turbine combustor chamber by Mr P Raghupaty, Sc ‘D’, CEMILAC, Bangalore.

Summer/Winter Internships From other institutions Supervision:

Other Supervision:

Research Publications from 2010 to 2020:

Research Publications:

Books:

• Structural adhesive joints: Design, Analysis, and Testing by K L Mittal and S K Panigrahi, Publisher: Wiley 2020, ISBN: 1119736439, 9781119736431.
• Aero Engine Combustor Casing: Experimental Design and Fatigue Studies. by S K Panigrahi and N Sarangi, Publisher: CRC Press (Taylor and Francis Group), ISBN: 978-1-138-03283-5.
• Product Life Cycle, Modeling, Simulation and Synthesis by S K Panigrahi and B Gurumoorthy, Excel India Publisher, ISBN: 978-93-86724-27-4.
• Modelling and Simulation in Computational Mechanics, Publisher: LAP, Germany, ISBN: 978-3-8383-0694-0.

Journal Articles:

In 2020

• Dewangan, M. and Panigrahi, S. K., 2020, “FEA of Hybrid 3D Orthogonal Woven Composite subjected to Ballistic Impact with Multi-scale Modelling,” Int. J. of Polymers for Advanced Technologies, In Press.
• Dewangan, M., Pankaj Kumar and Panigrahi, S. K., 2020, “Stress Analysis of Woven Composites 3D Shell with Hole using Multi-Scale Modeling approach”, J. of Industrial Textiles, In Press.
• Tejas M. Gondhalekar and Panigrahi, S. K., 2020, “Transient Analysis of Concrete Railway Sleeper using 3 Dimensional Finite Element Method,” Journal of Institution of Engineers: Series A, Revised Submitted.
• Dewangan, M. and Panigrahi, S. K., 2020, “FEA of Plain Woven Kevlar/Epoxy Composites Subjected to Normal and Oblique Impact with Multi-Scale Modeling,” Int. J. of Fibers and Polymers, Accepted and In Press.
• Dewangan, M. and Panigrahi, S. K., 2020, “The Finite Element Analysis of the Launcher Pod during firing of rockets for Defence Applications," Defence Science Journal, Under Review.
• Dewangan, M. K. and Panigrahi, S. K., 2020, “Multiscale Modelling of 3D Orthogonal Woven Composites under Ballistic Impact Loading using FEM,”  Int. J. of  Fibers and Polymers, Accepted and In Press.
• Mahapatra, K. K. and Panigrahi, S. K., 2020, “Dynamic Response and Vibration Power Flow in Rectangular Isotropic Plate using Fourier Series Approximation and Mobility Approach,” Int J of Vibration Engineering and Technology, 8: pp. 105-119. (DoI: 10.1007/s42417-018-0079-3).
• Mahapatra, K. K. and Panigrahi, S. K., 2020, “Effect of General Coupling Conditions on the Vibration and Power Flow Characteristics of a Two-plate Built-up Plate Structure,” Mechanics Based Design of Structures and Machines, An International Journal, Accepted and In Press.
• Dewangan, M. and Panigrahi, S. K., 2020, “Multi-Scale Modeling of 3D Angle Interlock Woven Composite Subjected to Ballistic Impact using FEM,” Int. J. of Polymers for Advanced Technologies, Accepted and In Press.
• Mahapatra, K. K. and Panigrahi, S. K., 2020, “In-Plane Vibration Characteristics of Isotropic Plate with Elastic Edge Restraints,” Int. Journal of Structural Engineering; 10 (2), pp. 120 – 138.
• Rakshe S, Nimje, S and Panigrahi, S. K., 2020, “Optimization of Spar Wingskin Joint of Laminated FRP Composites subjected to Pull-off Load using Taguchi Method – A Critical Review, Reviews of Adhesion and Adhesives, 8 (1), pp. 29 – 46. DOI: 10.7569/RAA.2020.097303.

In 2019

• Mahapatra, K. K. and Panigrahi, S. K., 2019, “Effect of General Boundary and Coupling conditions on the Vibration and Power Flow Characteristics of a Coupled H-shaped Three Plate Structure,” Noise & Vibration Worldwide: An International Journal, 50 (9 – 11), pp. 291-305.
• Mahapatra, K. K. and Panigrahi, S. K., 2019, “A New Fourier Series Method and Displacement Function for In-Plane Vibration and Power Flow Characteristics Analysis of Isotropic Rectangular Plates,” Noise and Vibration Worldwide; 50 (6), pp. 176-194.

In 2018

• Mahapatra, K. K. and Panigrahi, S. K., 2018, “Dynamic Response of a Damped Euler-Bernoulli Beam having Elastically Restrained Boundary Supports,” Int J of Institution of Engineers: Series C, DOI 10.1007/s40032-018-0485-z.
• Sahoo, B., Satpathy, R. K. and Panigrahi, S. K., 2018, “Effect of aluminising on the low cycle fatigue life of a directionally solidified nickel base alloy used for manufacturing turbine blade,” Int J of Materials and Structural Integrity, 12 (1/2/3): pp. 58 – 75.
• Mahapatra, K. K. and Panigrahi, S. K., 2018, Coupled Plate Vibration Analysis using General Conditions of Boundary Restraint and Coupling Junction”, London Journal Engineering Research, 18 (2): pp. 53 – 64.

In 2017 

• Tyagi, S. and Panigrahi, S. K., 2017, “An SVM – ANN hybrid classifier for diagnosis of gear fault”, Applied Artificial Intelligence: An International Journal, 31 (3), pp. 209 – 231, DOI: 10.1080/08839514.2017.1315502.
• Baishya, N., Das R. R. and Panigrahi, S. K., 2017, “Failure Analysis of Adhesively Bonded Tubular Joints of Laminated FRP Composites subjected to combined Internal Pressure and Torsional Loading,” Int Journal of Adhesion Science and Technology, 31 (19-20), pp. 2139-2163, DOI: 10.1080/01694243.2017.1307498.         
• Tyagi, S. and Panigrahi, S. K., 2017, “A simple continuous wavelet transform method for detection of rolling element bearing faults and its comparison with envelope detection”, International Journal of Science and Research (IJSR); 6(3):1033. doi: 10.21275/ART20171614.
• Tyagi, S. and Panigrahi, S. K., 2017, “A DWT and SVM based method for rolling element bearing fault diagnosis and its comparison with artificial neural networks”, Journal of Applied and Computational Mechanics, 3 (1), pp. 80-91, DOI: 10.22055/jacm.2017.21576.1108.
• Dewangan, M. K. and Panigrahi, S. K., 2017, “Numerical Investigations of Low Velocity Impact on Armor Composites”, Journal of Engineering and Technological Research, pp. 102 – 107.
• Tyagi, S. and Panigrahi, S. K.,  2017, “An improved Envelope Detection method using Particle Swarm Optimization for rolling element bearing fault diagnosis”, Journal of Computational Design and Engineering, 4 (4), pp. 305-317, DOI: 10.1016/j.jcde.2017.05.002.
• Tyagi, S. and Panigrahi, S. K., 2017, “A Hybrid Genetic Algorithm and Back-Propagation classifier for gearbox fault diagnosis,” Applied Artificial Intelligence: An International Journal, 31 (7-8), PP. 593-612, DOI-10.1080/08839514.2017.1413066.           
• Nimje, S and Panigrahi, S. K., 2017, “Study on Stress and Failure Analyses of Functionally Graded Adhesively Bonded Out-of-Plane Joints of Laminated FRP Composite Plates and Tubes: An Overview,” Int Journal Reviews on Adhesion and Adhesives, 5 (2), pp. 162 – 194, DOI: 10.7569/RAA.2017.097304.
• Nimje, S and Panigrahi, S. K., 2017, “Strain Energy Release Rate based Damage Analysis of Functionally Graded Adhesively Bonded Tubular Lap Joint of Laminated FRP Composites,” The Journal of Adhesion, 95 (5), pp. 389 – 411, DOI: 10.1080/00218464.2015.1077706.
• Sahoo, B., Panigrahi, S. K. and Satpathy, R. K., 2017, “Creep Life Degradation and Micro-structure Degeneration in a Low Pressure Turbine Blade of a Military Aircraft Engine”, Int J of Failure Analysis and Prevention, 17 (3), pp 529–538, DOI 10.1007/s11668-017-0271-x.
• Panigrahi, S. K., and Das R. R., 2017, “Study and Analysis of Damages in Functionally Graded Adhesively Bonded Joints of Laminated FRP Composites: A Critical Review,” Int J Reviews on Adhesion and Adhesives, 4 (2), pp. 152 – 165, DOI: 10.7569/RAA.2016.097305.

In 2016

• Nimje, S and Panigrahi, S. K., 2016, “Effects of Functionally Graded Adhesive on Failures of Socket Joint of Laminated FRP Composite Tubes,” International Journal of Damage Mechanics, DOI: 10.1177/1056789516650248.
• Mahapatra, K. K. and Panigrahi, S. K., 2016, “Effect of randomly varying boundary support on free vibration systems,” The MILIT Journal, 4, pp 27 - 32.
• Das, Kallola and Panigrahi, S. K. 2016, “Ballistic Impact Analyses Of Triangular Corrugated Plates Filled With Foam Core,” Advanced Computational Design: An International Journal, 2, pp 139-154.
• Mahapatra, K. K. and Panigrahi, S. K., 2016, “Vibration Characteristics of a Beam with Generalized End Supports,” Int. Journal of Structural Engineering, 7 (2), pp 193-215.
• Panigrahi, S.K., Sarangi, N. and Chandrasekhar U., 2016, “Experimental evaluation of proof load capability of an annular combustor casing of a gas turbine engine,” Journal of Experimental Techniques, 40 (2), pp. 841-848.

In 2015

• Mishra, Pradeep, Panigrahi, S. K. and Das, Swarup, 2015, “Ships Steering Autopilot Design by Nomoto Model,” Int Journal of Mechanical Engineering and Robotics, 3 (3), pp 37 -41.
• G, Praneeth Kumar, Panigrahi, S. K. and Mahapatra, K.K. 2015, Suitability of machinery foundation for marine applications using modal analysis,” International Journal of Engineering and Management Research (IJEMR), Special Issue, pp. 142 – 154. 
• Dewangan, M and Panigrahi, S. K. 2015, “Residual stress analysis of swage autofrettaged gun barrel using finite element method,” International Journal of Mechanical Science and Technology, 29 (7), pp 2933 – 2938.
• Nimje, S and Panigrahi, S. K., 2015, “Design and Analysis of Functionally Graded Adhesively Bonded Double Supported Tee Joint of Laminated FRP Composite Plates under Varied Loading,” International Journal of Adhesion Science and Technology, Vol. 29 (18), pp 1951–1970.
• Sahoo, B., Satpathy, R. K. and Panigrahi, S. K., 2015, “Analysis of a Turbine Blade Failure in a Military Turbojet Engine,” International Journal of Turbo and Jet Engines, Vol. 33 (2), pp.151-159.
• Nimje, S and Panigrahi, S. K., 2015, “Interfacial Failure Analysis of Functionally Graded Adhesively Bonded Double Supported Tee Joint of Laminated FRP Composite Plates,” International Journal of Adhesion and Adhesives, 58, pp 70-79.
• Sahoo, B., Satpathy, R. K., Satyanarayana, D. V. V. and Panigrahi, S. K., 2015, “Effect of heat-treatment on creep life of a Nickel base alloy used for low pressure turbine blade in a military aircraft engine,” Journal of Aerospace Sciences & Technologies, 67 (2B), pp. 341 – 347.
• Dahiwala, N. K., Panigrahi, S. K. and Akella, K, 2015, “Numerical Analyses of Sandwich Panels with Triangular Core Subjected to Impact Loading,” Int J of Sandwich Structures and Materials, 17 (3), pp 238 -257.

In 2014

• Tyagi, S. and Panigrahi, S. K., 2014, “Transient analysis of ball bearing fault simulation using finite element Method,” Int Journal of Institution of Engineers: Series – C, 95 (4), pp 309-318.
• Nimje, S and Panigrahi, S. K., 2014, “Numerical Simulation for Stress and Failure of Functionally Graded Adhesively Bonded Tee Joint of Laminated FRP Composite Plates,” International Journal of Adhesion and Adhesives, 48, pp. 139 – 149.
• Tyagi, S. and Panigrahi, S. K., 2014, “Bearing fault diagnosis using acoustic signal processing technique”, The MILIT Journal, 1, pp 11-17.
• Sahoo, B., Panigrahi, S. K., 2014, Low Cycle Fatigue Behavior of a Turbine Blade made of Nickel base Wrought Alloy, International Journal of Advanced Materials Research, 891-892, pp. 506-511.
• Sarangi, N., Panigrahi, S.K., Chandrasekhar U., 2014, “Fatigue Life Evaluation of an Annular Combustor Casing of Gas Turbine Engine,” Journal of Testing and Evaluation, 42 (3), pp. 629 – 638.
• Mahapatra K., Panigrahi, S. K., Das, Arnab, 2014, “Noise Characterization and Prediction:  A Review of Domains and Application,” Marine Engineers Review (India), Journal of The Institute of Marine Engineers (India), 8 (11), pp. 28 – 39.

In 2013

• Raghupathy, R, Panigrahi, S. K. and Mishra, R. K., 2013, “Effects of Interface Roughness on the Life Estimation of a Thermal Barrier Coating Layer,” International Journal of Surface Science and Engineering, 7 (3), pp. 269 – 283.
• Panigrahi, S. K., 2013, “Structural design of adhesively bonded single lap joints with delaminated FRP composite adherends,” Composites: Part B – Engineering, 51, pp. 112 – 120.
• Sarangi, N., Panigrahi, S.K., Patel, S.K., Ramesh, P. and Kumar, J., 2013, Effect of fatigue loading on proof strength of a combustor casing of an aero-engine, Journal of failure analysis and failure prevention, 13, pp. 293-301.

In 2012

• Panigrahi, S. K., and Y. X. Zhang, 2012, “Characteristics of interlaminar stresses for studying the damages in adhesively bonded single lap joints of laminated FRP composites,” Australian Journal of Mechanical Engineering, 9, pp. 93-100.

In 2011

• Panigrahi, S.K. and Y.X. Zhang, 2011, “Investigation of Damage Growth in Single Lap Joints of Composite Laminates" Journal of Adhesion Science and Technology, 25, pp. 1223-1244.

In 2010

• Panigrahi, S. K. and Y. X. Zhang, 2010, “Nonlinear finite element analyses of tee joints of laminated composites,” IOP: Material Science and Engineering, 10, pp. 1-8.

Book Chapters:

• Nimje, S. and Panigrahi, S. K., 2019, “Damage Behaviour in Functionally Graded Structural Adhesive Joints with Double Lap Joint Configuration,” Chapter 8, Structural adhesive joints: Design, Analysis and Testing Edited by K L Mittal and S K Panigrahi, Publisher: Wiley 2020, ISBN: 1119736439, 9781119736431.
• Panda, H.S., Samant, Rigved, Mittal, K. L. and Panigrahi, S. K., 2019, “Durability Aspects of Structural Adhesive Joints,” Chapter 4, Structural adhesive joints: Design, Analysis and Testing by Edited by K L Mittal and S K Panigrahi, Publisher: Wiley 2020, ISBN: 1119736439, 9781119736431.
• Nimje, S. and Panigrahi, S. K., 2018, “Study on Stress and Failure Analyses of Functionally Graded Adhesively Bonded Out-of-Plane Joints of Laminated FRP Composite Plates and Tubes: An Overview,” Progress in Adhesion and Adhesives, Edited by K L Mittal, Vol. 3, Chapter - 5, pp. 155-184, Scrivener Publishing, Wiley.
• Panigrahi, S. K., and Das R. R., 2016,  “Study and Analysis of Damages in Functionally Graded Adhesively Bonded Joints of Laminated FRP Composites”, Progress in Adhesion and Adhesives, Edited by K L Mittal, Vol 2, Chapter – 6, pp. 147 – 156, Scrivener Publishing, Wiley.
• Panigrahi, S. K., 2009,  “Computer Aided Modelling and Simulation of damages in Adhesively Bonded Joints of FRP Composites, Modelling and Simulation in Computational Mechanics, Edited by S K Panigrahi, LAP Germany, pp. 1-17.

Conference Papers:

Research/Review Submitted/Under Review:

Any Publications Submitted/Under Review:

Invited Talks:

• Special talk on “Structural Design” for BDL Scientists: July 2019.
• DRDL Hyderabad: Member for PRC of Nag Missile Systems on Wheeled Track Vehicle – 27 Apr 2019.
• Invited talk on Finite Element Analyses of Functionally Graded Adhesively Bonded joints of Laminated FRP Composites Plates and Tubes during Short Term Course (STC) on FEMTMA-2018 at VSSUT Burla on 4 July 2018.
• VRDE Ahmednagar: Academic expert for PDR of Design and Development of Mounted Gun Systems, 23 Mar 2018.
• VRDE Ahmednagar: Academic expert for CDR of Armoured Personnel Carrier (APC), 13 Apr 2017.
• VRDE Ahmednagar: Academic expert for PDR of Armoured Personnel Carrier (APC), 10 Apr 2017.
• Chief Guest, Invited Speaker and Session Chairman, Int Convention on dissemination of innovative research in Science, Engineering Technology & Management Applications, Kuala lumpur, Malaysia, 10 – 14 Mar 2017.
• Invited talk on Computational methods for damage assessment in composite structures at National Workshop on Composites: Fracture Toughness, NDE and Failure Analysis at PIIT, New Panvel, July 22 – 23, 2016.
• Chief Guest and Keynote Speaker during Mech PGCON 2016 at Dr DY Patil Institute of Engineering and Technology on 22 June 2016.
• Distinguished lecture on “Damage analysis of functionally graded adhesively bonded joints of laminated FRP composite plates and tubes” during FDP on ‘Advanced composite materials’ 24-28 May 2016, VIT Pune.
• Expert talk on ‘FEA: Case studies’ in Faculty Development Programme on FEA in Engineering Application, SRES’s College of Engineering, Kopargaon, 22 – 23 Feb 2016.
• Guest lecture on Fracture mechanics principles for access of damage growth in composite structures, DY Patil College of Engineering, Pune, 3 July 2015

Patents:

• Panigrahi, S.K. and Tyagi, S., Bearing Fault Detector. Application No. 201621003344. The Patent Office Journal, India. 2016 May 27: 20909.http://www.ipindia.nic.in/writereaddata/Portal/IPOJournal/1_346_1/part1.pdf. doi: 10.6084/m9.figshare.4753606. v2.

Awards/Scholastic Achievements:

• Distinguished Scientist in Composite Structures Award by Venus International Research Foundation, Chennai, 2018.
• Innovative Technological Research   & Dedicated   Professor Award by JETR-JETMS Kuala Lumpur, Malaysia, 2017.
• Fellow, Indian Society of Mechanical Engineers (ISME), 2017.
• Listed in Who’sWho in the world biography, USA, 2014 – 2020.
• Executive Council Member, Indian Society for Theoretical and Applied Mechanics (ISTAM), 2012-2015.
• Bharat Jyoti award – 2012.
• One of Top 100 Scientists of the year, UK, 2012.
• Fellow, Institution of Engineers (India), 2010.
• International Visiting Academic, UNSW@ADFA, Canberra, Australia, 2009.
• GATE (Graduate Aptitude Test in Engineering) Scholarship (1994-1996).
• National Scholarship (1988-1992).
• Merit Scholarship (1985-1988

Government Funded Projects:

Any Other:

Professional Membership:

• Fellow, Indian Society of Mechanical Engineers (ISME).
• Fellow, Institution of Engineers (IE), India.
• Member, Indian Society of Theoretical and Applied Mechanics (ISTAM)
• Member, Indian Association for Mechanism and Machines (AMM).
• Member, Indian Academy of Computational Mechanics (IndACM)
• Member, Indian Society for Technical Education (ISTE).

Training programmes/ Conference organized

• Certified course on software quality engineer (CSQE), 03 - 14 Feb 2020
• Product Lifecycle Modelling, Simulation, and Synthesis (PLMSS 2017): December 13 – 15, 2017 at DIAT Pune
• Advances in Mechanical Engineering and Technology (AMET – 2015), Jointly organized by DIAT and MIT Pune, 12 – 13 March 2015.
• One month customized course for HAL MTs during 23 June – 19 July 2014.
• one week of advanced training on advanced FEA using ABAQUS: 03 – 07 Feb 2014.
• Continuing Education Programme (CEP) on ‘Finishing school on personality development’ during 23-28 Jan 2012.
• 20 weeks of Post Induction Training School (POINTS – 16) conducted at DIAT (DU), Pune: Continuing (April 20 – September 07, 2011).
• Staff Development Programme on 'Soft computing in engineering applications': Funded by AICTE, 2010.
• National Conference on 'Computer-aided modelling and simulation in computational mechanics' (March 13-14, 2009)  

Ph.D./ M Tech (Research) Thesis Examiner:

• Adjudicated 32 Ph D thesis for International Institutions/IITs/NITs/State Universities etc.

Editorial Board Member

• Reviews of Adhesion and Adhesives (RAA), Scrivener Publishing House, USA.
• Innovations in Corrosion and Materials Science (ICMS)
• Current Smart Materials (CSM)

Selection Committee Member:

• Selection board member for RAC, DRDO.
• Selection board member for Faculty recruitment by CoEP, Pune, 2018, 2019, 2020.
• Selection board member, L & T Evaluation Board, Techgium™ 2019, 3 March 2019, Mumbai.
• Selection board member, L & T Evaluation Board, Techgium™ 2017, 6 Feb 2017, Mumbai.
• Recruitment of Junior/Assistant engineer of Government of Arunachal Pradesh, Nov 2011.

The Reviewer of Peer-Reviewed International Journals/Conferences

• International  Journal  of Adhesion and Adhesives (Elsevier)
• International  Journal of Materials and Design (Elsevier)
• Composites: Part B (Elsevier)
• Journal of Experimental Techniques (Wiley Inc)
• Journal of Adhesion Science and Technology (Taylor & Francis)
• Tribology Transactions (Taylor & Francis
• Composite Structures (Elsevier
• J of Damage Mechanics (SAGE) Journal of Reinforced Plastics and Composites (SAGE)
• Journal of Composite Materials (SAGE)
• Particulate Science and Technology: An International Journal
• Journal of Reinforced Plastics and Composites (Sage)
• Journal of Composite Materials (Sage)
• Particulate Science and Technology: An International Journal ( Taylor & Francis)
• Advanced Materials Research (Transactions Technical Publication Inc)
• International Journal of Design Engineering
• Journal of Reinforced Plastics and Composites
• International Journal of Damage Mechanics (Sage)
• Journal of Composite  Materials (Sage)
• International Journal of Structural Engineering and Mechanics